Prestige Series

Product Details

Standard Cabin Dimensions

24, 27, 29 or 31'

13'-4 5/8" or 14'-8 1/2"

10'-9" or 11'-8 3/8"

Basement and semi-downdraft options add additional height

*These are nominal dimensions and should not be used for planning purposes. Please contact Nova Verta for detailed drawings and specifications tailored to your installation.


Allen-Brady, Color Touch Screen
Rated for class I Division II hazardous locations

Direct Fired
Siemens Touch Screen
Rated for Class I Division II hazardous locations

Light Fixtures
4 tubes - Inside access Class 1 Division 2

- Vortex System
- Wind System Ready(allowing for future wind system)
- Velocity Cure
- Energy Savings System
- Auto Prep Mode System
- Light fixture: 6 tubes - Inside access Class 1 Division 2
- Post Filtration extractor
- 3-row tunnel pit
- Dry filter basement raises booth and equipment 16'
- Inside ramp
- Drive-through door
- Side exit door (additional or for drive-through)
- 80 volt motors, 277 volt lighting, and 120-volt controls and burner
- Electric roll-up door for automotive booth
- Electric side roll-up door
- Viewing window side wall
- Additional sizing and configurations are available upon request
- Indirect or direct-fired air make up unit
- (Note: ANSI standards do not permit a recirculating Prep cycle with a direct-fired system)

Code Compliance
Most products are ETL Listed for their
intended purpose to meet IFC, IBC,
IEC, IMC, NFPA 33, 70, 86, 91, 101,
UL508A, ANSI, and OSHA standards

Product Information


The Prestige Series offers our best cabin lighting package. The Prestige 27' cabin features 23 Class I, Division II light fixtures with four 98CRI - T8 tubes and multi-voltage, energy efficient, electronic ballasts. These same features are provided by the optional six-tube fixtures for applications requiring enhanced visibility. The inside access fixtures horizontally line both side walls and hip angles. These continuous lighting banks produce up to 50% more measured light output than any booth on the market, providing unobstructed and unprecedented illumination.

Performance & Operational Savings

The Prestige Series offers the choice of indirect or direct-fired heating with a designed airflow that equals competitive designs that use 50% more horse power. The Prestige Series also provides the best laminar airflow in the industry. Optional controller technology, variable frequency drives, self-diagnostics, and energy savings controls give you the power and information you need to maximize production and minimize operating expenses.

Indirect Fired

Nova Verta's indirect-fired system controls provide three distinct operating cycles: prep, paint, and cure. The automated pressure control uses a variable frequency drive (VFD) on the exhaust fan. During the prep and cure cycles, this configuration is proven to conserve energy by recirculating 90% of the warmed airflow - saving 35% on utility costs and filtration expenses when compared to typical direct-fired systems and 25% over the newer, economic direct-fired systems using a VFD. Plus, the prep cycle, which is exclusive to Nova Verta, prevents operators from being exposed to the dangers of carbon monoxide. Nova Verta's indirect-fired solutions also have lower humidity output, which promotes quicker drying of waterborne paints.

The Prestige Series indirect-fired booths use an Allen-Bradley control system, featuring a 600 Color Touch Screen series Class I Division II remote mount operator station mounted in booth wall or other desired locations such as mix room entry.

Optional Auto Prep Mode System (APMS) automatically shifts booth into prep mode after desired timer set point and returns to spray cycle upon spray gun activation.

Direct Fired

The standard direct-fired system also has automated pressure control. It features 1.1 million BTU with a 100 degree temperature rise in the spray cycle. The Prestige Series direct-fired units recirculate 90% of the booth's warm air during cure cycle.

The direct-fired models use a Siemens touch screen operator station. An optional energy saving system (ESS), with a dual VFD and an automated economy cycle slows air speed when not spraying to conserve fuel and electricity usage.

Booth Construction

With pre-coated, galvanized, dual panel construction, two inches of insulation, tubular steel center, door hardware, sealing material, and nut and bolt assembly, Nova Verta paint booths are built to last.

Factory pre-wiring expedites the installation of Nova Verta paint booth systems. Color-coded and labeled wiring in Seal Tite conduit, and easy-to-read installation manuals minimize the need for electrical contractors and reduce set-up time and expense.