1-800-668-2921

Industrial & Truck

Whether you’re painting industrial trucks and equipment, boats, rail, or aircraft, the flexibility of Nova Verta’s Industrial Paint Booths lets you create a large-scale painting system tailored to your specific needs. From solutions that provide short-term payback, long-term operational cost savings, or systems in between, the quality craftsmanship of Nova Verta’s modular components are designed for year-in, year-out performance.

Lighting

The MaxiRange Series offers our best cabin lighting package. The cabin features Industrial LED Lighting fixtures with 100,000 hour rating.  Optionally dimmable from touch screen (top banks and bottom banks). These lighting banks produce up to 50% more measured light output than any booth on the market, providing unobstructed and unprecedented illumination.

Performance & Operational Savings

The MaxiRange Series offers indirect-fired heating with a designed airflow that equals competitive designs that use 30-50% more horsepower. The MaxiRange Series also provides the best laminar airflow in the industry. Touch Screen operator station offers outstanding technology, variable frequency drives, self-diagnostics, and energy savings controls give you the power and information you need to maximize production and minimize operating expenses.

Indirect Fired

Nova Verta’s indirect-fired system controls provide three distinct operating cycles: prep, paint, flash fresh air, flash recirc and cure. The automated pressure control uses a variable frequency drive (VFD) on the exhaust fan. During the prep, flash recirc and cure cycles, this configuration is proven to conserve energy by recirculating 90% of the warmed airflow – saving 35% on utility costs and filtration expenses when compared to typical direct- fired  systems and 25% over the newer, economic direct-fired systems using a VFD. Plus, the prep cycle, which is exclusive to Nova Verta, prevents operators from being exposed to the dangers of carbon monoxide. Nova Verta’s indirect-fired solutions also have lower humidity output, which promotes quicker drying of waterborne paints.

Optional Auto Prep Mode System (APMS) automatically shifts booth into prep mode after desired timer set point and returns to spray cycle upon spray gun activation.

Booth Construction

With pre-coated, galvanized, dual panel construction, two inches of insulation, tubular steel super structure center, door hardware, sealing material, and nut and bolt assembly, Nova Verta paint booths are built to last. Side walls due to the new technology in lighting are vertical panels from floor to angle hip lighting. This makes maintenance simpler and cleaner with no lower fixtures to maintain from overspray accumulation. Simplifies removal and application of booth guard coatings.

Factory pre-wiring expedites the installation of Nova Verta paint booth systems. Color-coded and labeled wiring in Seal Tite conduit, and easy-to-read installation manuals minimize the need for electrical contractors and reduce set-up time and expense.

Product Details

Length
24.5’, 27’, 29’, or 31’
Further options available upon request.

Width
13′-4 5/8″ or 14′-8 1/2″
Further options available upon request.

Height
10′-9″ or 11′-8 3/8”
Further options available upon request.

Basement, semi-downdraft and side downdraft
available but also usually add additional height.

Controller

Indirect-Fired
Allen-Brady, Panel View Plus 7 Color Touch Screen with 1400 series PLC.
Rated for class I Division II hazardous locations.

Options

  • Wind System Plus
  • Auto Prep Mode System (APMS)
  • Dry filter raised basement raises booth and equipment 16′
  • Inside ramp
  • External ramp
  • Drive-through door
  • Side exit door (additional or for drive-through)
  • 208,230 or 480 volt motors, 277 volt lighting, and 120-volt controls and burner
  • Electric roll-up door for automotive booth
  • Electric side roll-up door
  • Viewing window side wall
  • Additional sizing and configurations are available upon request
  • Indirect or direct-fired air make up unit
  • (Note: ANSI standards do not permit a recirculating Prep cycle with a direct-fired system)

Code Compliance
Most products are ETL Listed for their intended purpose to meet IFC, IBC,
IEC, IMC, NFPA 33, 70, 86, 91, 101, UL508A, ANSI, and OSHA standards

How much can you expect to save over the life of your booth?

Contact our development team and we'll do a custom analysis.

8207 E Trent Ave
Spokane Valley, WA 99212

8207 E Trent Ave
Spokane Valley, WA 99212