Paint Booths
Nova Verta USA offers a wide variety of automotive paint booths, truck paint booths, and industrial paint booth applications. With three distinct operating modes and indirect heating systems, no other manufacturer’s system offers the start-to-finish spray paint booth operating efficiencies available from Nova Verta.
How much can you expect to save over the life of your booth? Contact Us today and we’ll do a custom analysis.
Five Easy Steps to Big Savings
Only Nova Verta’s paint spray booths feature five modes of operation. Because of this unique process, over the complete painting cycle, no other competitive system achieves the cost-efficiencies available from a Nova Verta solution. Don’t be fooled by single-mode process comparisons, evaluate paint spray booths on the complete start-to-finish process:
- Prep Cycle
The Prep Cycle optimizes booth conditions while final masking and tack off is performed. Using a variable frequency drive and make-up unit with a stainless steel heat exchanger, the Nova Verta system warms air and safely re-circulates it through the spray booth – without exposing operators to the dangers of carbon monoxide. No other paint spray booth system provides a Prep Cycle that creates OSHA-mandated working conditions, heats the air, maintains air pressure, brings metal to the desired spray temperature, and generatesmonthly utility savings of 35% or more when compared to competitive systems in its class.
- Spray Cycle
Once prep work is completed, a single press of the Controller shifts the Nova Verta spray booth operation to the Spray Cycle. At this stage, a steady stream of freshly heated air is provided into the spray booth and a constant, ideal booth pressure is automatically maintained at a minimum. The exhaust system is dry filtered using a reverse incline direct driven fan using a variable frequency drive for motor speed control, eliminating the need for inefficient pressure control dampers, or operator intervention.
- Flash Fresh Air Cycle
Flash Fresh Air is utilized for the flashing of low VOC and waterborne material after spray cycle is completed when not needing to conserve energy by utilizing 100% outside replacement air. This also will assist when cooler temperatures are needed but does not cool beyond ambient temperatures without additional equipment. This also activates Wind System for its desired setpoints – fully adjustable if equipped.
- Flash Re-Circulation Cycle
Flash recirculation is utilized to save energy by recirculating air significantly saving 40-50% on electrical and 80-90% on natural gas, propane or diesel. Also allows for elevated temperature. Time, temp are fully adjustable and returns to spray mode upon completion. This also activates Wind System for its desired setpoints – fully adjustable if equipped.
- Cure Cycle
After the painting process is complete, another press of the Controller puts the booth in Cure/Bake Cycle. The Bake Cycle, like the Prep Cycle, effectively re-circulates air, minimizing electrical and fuel consumption. Compared to other paint spray booth systems in its class, Nova Verta’s spray booth provides higher-velocity airflow, shortening cure times on conventional and waterborne paints.
Automotive Paint Booths
Super Prestige
DIRECT FIRE OR INDIRECT FIRE
Our larger and wider and taller series. The Super Prestige Series offers our best cabin lighting package like the Prestige. The Super Prestige comes standard with an additional width of 15” and additional height of 12” as well as 12” additional entry door height. The air make-up unit and duct work are also larger to accommodate more air flow for the larger sizes. NEW in 2020 is the Industrial LED optional fixture with 100,000 hour rating and dimmable capability offering 40-50% more measured light output within the booth. NEW in 2020 is extended Direct Fire burner options for those who prefer this type of heating over our standard Indirect Burner that only Nova Verta has perfected the use and performance.
Prestige
DIRECT FIRE OR INDIRECT FIRE
Our most popular production series. The Prestige Series offers our best cabin lighting package. The Prestige 27′ cabin features 23 Class I, Division II light fixtures with four 98CRI – T8 tubes and multi-voltage, energy efficient, electronic ballasts. These continuous lighting banks produce up to 50% more measured light output than any booth on the market, providing unobstructed and unprecedented illumination. NEW in 2020 is the Industrial LED optional fixture with 100,000 hour rating and dimmable capability offering 40-50% more measured light output within the booth.
NEW in 2020 is extended Direct Fire burner options for those who prefer this type of heating over our standard Indirect Burner that only Nova Verta has perfected the use and performance.
Conquer
DIRECT FIRE OR INDIRECT FIRE
Most Economically designed production booth. The Conquer was recently redesigned for economically driven buyers. With the new Industrial LED fixtures with 100,000 hour rating and shadow less illumination allows us to put the fixtures in the upper hip angle only as the measured output of light throughout the booth was equal to or slightly better than our Prestige or Super Prestige models with Upper and lower lighting with T8 Tubes. This allows us to have a lower vertical wall panel design
Industrial & Truck Paint Booths
Industrial & Truck Booths
DIRECT FIRE OR INDIRECT FIRE
Whether you’re painting industrial trucks and equipment, boats, rail, or aircraft, the flexibility of Nova Verta’s Maxi-Range Industrial Paint Booth lets you create a large-scale painting system tailored to your specific needs. From solutions that provide short-term payback, long-term operational cost savings, or systems in between, the quality craftsmanship of Nova Verta’s modular components are designed for year-in, year-out performance.
How much can you expect to save over the life of your booth?
Contact our development team and we’ll do a custom analysis.
8207 E Trent Ave
Spokane Valley, WA 99212
8207 E Trent Ave
Spokane Valley, WA 99212